How much should you budget?
As a national planning reference, Angi’s 2026 data puts most sprinkler repairs at $137–$422, averaging $278. A single head replacement is a different scope from tracing a buried leak or diagnosing a controller. Your Wichita-area estimate depends on the actual fault and access to it.
These figures are national benchmarks, not Prestige Lawn Care rates. For your yard, request a repair estimate and describe what the system is doing.
Compare costs by the component being repaired
The following ranges come from Angi’s national sprinkler repair cost data, updated August 31, 2026. They describe different repair types; they are not a menu to add together.
| Repair | Published range |
|---|---|
| Sprinkler head replacement | $65–$90 |
| Valve repair or replacement | $75–$300 |
| Pipe leak repair | $120–$400 |
| Controller repair | $100–$500 |
A buried repair can also leave lawn restoration to account for. Ask what the quoted total covers, including diagnosis, labor, materials, and restoring the disturbed area.
One weak sprinkler does not identify the failed part
A short spray pattern can have several causes. Rain Bird’s sprinkler-head troubleshooting guide identifies clogged filters, nozzle settings, insufficient flow, and a head that has settled too low among the possibilities. Replacing a head without identifying the cause may leave the same coverage problem.
When you request service, note whether the trouble affects one head, one zone, or the whole yard. Share photos of visible damage and tell us whether you noticed the problem while watering or while the system was off. Avoid opening electrical equipment or digging to investigate a buried fault yourself.
Get a complete repair price before adding upgrades
Ask for the fault being addressed and the area that will be tested afterward. Confirm whether a diagnostic visit has a charge, whether that charge applies toward the repair, and whether there is a minimum service charge. If the cause is not yet known, ask what additional work needs your approval.
Keep optional improvements separate. A controller upgrade, new zone, or expanded bed irrigation changes the scope beyond fixing the original fault. Separate prices let you decide what restores working coverage now and what can wait.
For homes in Derby, Andover, Rose Hill, and the wider Wichita service area, include your address and access instructions. Mention a locked gate or a repair area beneath a deck or beside paving so access can be discussed before the visit.
Repair the fault or replace the system?
Ask for an assessment of what still works. One damaged head in an otherwise functioning system gives you a different decision from repeated leaks and unreliable zones. Review past repairs, current coverage, and parts availability before deciding on a larger investment.
If replacement is proposed, request a separate irrigation installation estimate with the intended coverage and zone plan. Yard acreage alone does not describe that work. Compare it with the repair scope rather than treating a new-system price as the cost of fixing a single problem.
Prestige Lawn Care’s sprinkler repair service covers heads, valves, lines, and controller issues. For seasonal checks beyond an immediate repair, read the spring sprinkler startup guide.
Sprinkler repair cost questions
What does it cost to replace a sprinkler head?
Angi’s national repair table lists $65–$90 for sprinkler head replacement. Ask whether your local quote includes the service visit, the head and connecting parts, labor, and a coverage test. Prestige Lawn Care prices your repair after reviewing the problem.
Can an old sprinkler system be repaired?
Age alone does not decide it. Ask whether compatible parts are available and whether the remaining zones work well. An isolated fault can be a repair candidate; repeated failures or poor coverage across the yard warrant a separate upgrade or replacement estimate.
Why can the repair visit cost more than the sprinkler part?
The visit can include finding the fault, accessing buried components, replacing connecting parts, adjusting coverage, and testing the zone. Ask how diagnosis and minimum service charges are handled before authorizing work.